-
### Description
Some of Gcode generators, especially focused on PCB milling provide great feature: add bridges/supports for cutout operations.
For example I have some plate (plywood, fiberglass etc)…
-
We are to come out with 5 different use cases, such as the ones below:
- Underwater monitoring
- Underwater network
- Data milling
- AUV tracking
- Interoperability using Janus
- ....
-
Tool to quickly replace corners with dogbones of given diameter the same way we make fillets would be super usefull when drawing plans for CNC milling.
![image](https://user-images.githubuserconten…
-
Files is here: https://github.com/fellesverkstedet/Bark-beetle-parametric-toolpaths/tree/master/Development%20files
The goal is to save a lot of time setting up milling job. I think I have found a …
-
During discussions of the PVMT OVRLAY and MILL report needs.
Discovered portlets of stakeholders had not be refreshed (showing start centers from months ago)
Refreshed now showing all.
Created a…
-
Hello,
On my **Atomstack A10 V2**, I would like update/upgrade the firmware for implement air assit.
I think mainboard can to do. Because "**Air Assit**" is write on this one. But i think the orig…
-
The current pin assignments were mostly chosen before the board layout was made, resulting in a breakout board that has a large number of long, winding traces. I'm pretty sure we could choose better p…
-
As LW4 is strongly moving towards CNC milling, we also need to support switching between machine coordinates and work coordinates.
We also need to support the different coordinate systems G54 to G59…
-
...so the miller can complete the path between pads in one go.
-
Welcome to world of 3D Printing & CNC Cutting - заглавие
we are а people who designe, printing and a little bit milling and engraving - малко инфо под заглавето