-
Jessica is working fine by while sailing with rudder "amidships" the rudder angle shows a turn to port of about 5 degrees. This is a calibration problem and adjustment is required.
-
I am using the IMU PRO unit with M5Stack.
The address for the BMM150, 0x10 is not found with I do an I2c scan.
The product page clear Three-axis Geomagnetic Sensor (BMM150) I2C Address: 0x10 but it …
-
Hallo erst Mal.
Ich hoffe ich habe diesen Datenpunkt nicht falsch verstanden :-)
Aber sehe ich das richtig, dass der hier (temperature_calibration) eingetragene Wert den ausgelesenen Wert im Daten…
-
## Current Behavior
No airspeed output in sensors. Unable to arm 'sensors calibrating'. Seems to work fine in 6.1.
## Expected behavior
airspeed to work and not prevent arming
## Suggested…
-
Hi Jones,
Thank you for sharing the GitHub repository.
I'm quite new to the concept of Hand-Eye Calibration, even though I have a degree in Robotics Engineering.
Does your code include 3D dat…
-
Some devices have problems with the proximity sensor (e.g. #165), so it would be nice to have a proximity sensor calibration tool as seen in Fairphone Open OS on the FP2.
-
Hello Miguel,
I have gone through the MQ-135-CorrectionFactorDHT11 document, and there are a few parameters that are not entirely clear to me.
I would like to use the correction factor for tempe…
-
**Inputs:**
- RAW audio file
- Calibration noise level [dB V^2/Hz^2], typically -90 V2 /Hz2
(instrument calibrated with white noise input (-90 V 2 /Hz 2 ) in anechoic and electrically shielded…
-
Sorry to interrupt you. I have faced a problem with the code.
I create my workspace. And copy the downloaded zip file to the /workspace/src and unzip it and rename as ati_sensor.
Then I have change…
-
Basically put this formula inside the configurator:
`new_scale = old_scale x (OSD_mAh_consumed / mAh_charged)`
https://oscarliang.com/current-sensor-calibration/
Is there already something plan…