-
Device name: Ultrasonic distance sensor MB 1330
Protocol: GPIO/Serial
URL of example product: https://www.maxbotix.com/Ultrasonic_Sensors/MB1330.htm
Further information e.g. data sheet: https://www…
-
## Tesla
Tesla: Overview | LinkedIn
https://www.linkedin.com/company/tesla-motors/
### Autopilot
Autopilot is an advanced driver assistance system that enhances safety and convenience behind the…
-
I was wondering if there is any way I can use these cheap sensors for obstacle avoidance with a Raspberry Pi and Dronekit. I know this can be done relatively easily with the RC inputs first fed into a…
-
The abstraction of the sensors should be easily testable and mockable without rasp. We need to find a library to communicate with GPIO pins ([pigpio?](https://github.com/joan2937/pigpio)).
Right no…
-
I would like to know whether Carla supports ultrasonic radar. I saw an obstacle sensor, but it can only detect the front obstacle, so how to detect the rear obstacle? It would be nice to have ultrason…
-
Once the placement is confirmed of all the sensor locations on the bike, I will simulate the capacitive sensors with 4 ultrasonic distance finders to allow me to test the decision matrix.
-
**Describe the bug**
- When selecting the ultrasonic sensor's presence mode the output is not as expected
- When connecting it to a show text block it shows (I assume) the initial distance reading …
-
### Board
ESP32
### Device Description
I want to connect my ESP32 to an Oracle Apex Resftul service,
With the code below, I'm getting "Error on sending POST: -11".
I read that the ESP32 Arduino C…
-
### Draft notes
* I want to capture how long I sit vs stand at my desk.
* Use an HC-SR04 ultrasonic distance sensor with ESPHome
* Can be used for presence
-
As stated in title, reflectance class is trying to get values for the line sensor, while pulling values from the ultrasonic.