-
Hello,
I am trying to compile this for the adafruit feather m0 RFM915 (SAMD21) and i am running into this error:
`undefined reference to timer0_overflow_count'`
from here:
```
cli();
…
-
For communicating with the litterbug, we are using the Adafruit RFM69HCW Packet Radio Breakouts.
This is a radio transceiver modules for long distance data communication.
With an SPI interface, th…
-
Hi,
I am new to Arduino and am trying to use the LMIC library for a university project. I started by trying the example code: examples/ttn-abp/ttn-abp.ino. I am currently using an Adafruit Feather…
-
- Support high power variant
- Support power level settings by user
-
@joeycastillo Is this wing compatible with Arduino ESP32/ESP32-Sx BSPs? If you're not sure - I'll pick one up and test :)
-
I tried to make settings for long-range, but with bw 31.25kHz, the message wasn't received. Also, I observed that with sf12 bw500kHz works to send and receive packet of data but with small length. If …
-
I've been experiencing an issue where poor power rails cause the bootloader to be entered spontaneously. You can simulate this by applying power to a Feather M0 by holding the ends of two wires togeth…
-
Hi.
I’m experiencing an annoying distortion on the Matrix LED displays. It’s like random horizontal lines (or points) appearing & disappearing. Always at the right side of any LEDs being on. It’s lik…
-
It turns out that if the Device ID = 0x0000, every frame is treated as an ID frame because the CRC is good for all of them. In fact, a valid ID frame also has '00" for the low order two bits of the LS…
-
Hi,
i´m trying to get your script running on a feather m0, but it seems that the wire.h had changed,
"'class TwoWire' has no member named 'transfer'"
i did´t found any usefull information ab…