-
Hello,
I'm using MPU6050_6Axis_MotionApps20.h plus main lines of MPU6050_DMP6 to get roll out of the MPU6050. That works fine as long as pitch = zero. Code being that of the example:
```
…
bk4nt updated
5 years ago
-
I just noticed the new `MPU_ATTR_NORMAL_OUTER_NON_CACHEABLE` etc defines.
A few issues with these, in descending order of importance:
* The `TR` transient indication is inverted. Bit 3 needs to …
-
I have completed the operation according to the document, and when I opened the uploader page, I encountered these errors. The page indicates that the file upload has been completed, but in reality,…
-
If there is an offloaded instruction in WB waiting for xif_result_valid, and the MPU blocks a load or store in EX, the lsu_mpu_status_wb may get updated with the LSU instruction related fault before t…
-
Dear Mr. Kriswiner
Thanks for your project on MPU 9250, I could draw some support form it.
I interfaced MPU 9250 on the GY 9250 board to a PIC MCU through I2C protocol.
I wanted to read the WHO_AM_…
-
Hello Mr. Kris Winer
I have an issue with the filter updates that was bugging me for a few weeks now and I believe that you could provide me with a solution.
I started of by connecting 6 MPU925…
-
During the initialisation of the vmpu in the procedure `vmpu_init_post`:
1. The MPU is enabled by `vmpu_arch_init()` which calls `vmpu_mpu_lock()`
2. Box configurations are loaded and regions are …
-
-
Hi there,
I'm currently working on a project related to MPU-6050, arduino, and labview software for simulation. I have poor knowledge in C or C++ PROGRAMMING. I need to use 2 mpu-6050 sensors to captu…
-
# Description
- [ ] it is required to define tasks for the drone
- [ ] board. Probably Raspberry pi zero 2w
- [ ] gps tracker
- [ ] accelerometer and gyro
- [ ] brushless motors with speed controllers…