-
## Expected Behavior
To finish calibration, the "Reboot Vehicle" button should reboot the vehicle, close the window and regain comms when the vehicle is up again.
## Current Behavior
When the "Re…
-
Dir sir,
thanks a lot for your code that help me a lot, can you explain those value cal in the transmiter .ino
int yawcal = -89,
pitchcal = 136,
rollcal = 96;
yours faithfully
-
https://github.com/calliope-mini/microbit-dal/blob/ae1b5379d3bf9477ce95afa9b7e2ab9b96a2f559/source/drivers/MicroBitCompassCalibrator.cpp#L292
-
Hi, i am also working on Erle Brain. I wanted to calibrate accelerometer and compass via mini USB cable but i couldn't. I am using APM Planner, i can connect via telemetry module and wifi. I calibrate…
-
**Describe the bug**
The readings from the board are changing dramatically whilst the board is completely still.
Hello :)
I recently aquired the MPU9250 as an upgrade to get the magnetometer to b…
-
Research on the code for the model of the magnetometer ordered, and write a class which will contain methods that can be called when required and there should be one main method... which should return…
-
Hey! Firstly, thanks for great paper and code!
I used this tool for intrinsics and extrinsics: https://github.com/hku-mars/LiDAR_IMU_Init
I need help on understanding how to implement those values f…
-
I run VINS but I also meet the question below, can you help me and give me some advice?
[ INFO] [1633764303.358300665]: Not enough features or parallax; Move device around
[ INFO] [1633764303.55817…
-
I just performed a manual calibration of my iSpindel at 20 degree C. It works as expected.
However, the temperature drift of the accelerometer is huge.
Example:
Temp (C) iSpindel (SG) Hydro…
-
First of all, cool project.
Comment/idea #1: I have asked around the Klipper Discord about this idea and the reaction has always been something to the effect of "I don't want to ping my bed with t…