-
```
What steps will reproduce the problem?
1. Load new LN-86BT with snakeos 1.3 'from original'
2. format an 8gb flash card EXT3
3. place the flash card in card reader on the front of device
4. Try t…
-
File upload not work for Canon EOS 650D, but summary info show this in device capabilities.
What I do wrong ?
dhamp updated
8 years ago
-
Thanks for putting this together and sharing.
Using:
Raspberry Pi 5
Raspberry OS 64bit Bookworm Debian 12
I flashed a new SD card with OS and followed your instructions. It compiled and built…
-
**Platform:** nagara
**Device:** pdx224
**Kernel version:** 5.15
**Android version:** android-13.0.0_r75
**Software binaries version:** SW_binaries_for_Xperia_Android_13_5.15_v4a_nagara.zip
*…
-
I'm facing an error during setup screen:
`sed: can't read /etc/iproute2/rt_tables: No such file or directory`
Here is what I have done:
- In Raspberry Pi Imager, flashed a SD Card with Ubuntu 2…
-
Hello, I flashed all files to the ECV2 through Arduino IDE with no problem and copied the required folders to the SD card and inserted it.
When I supply it with power the SSID shows up as ESP_CAB869…
-
### Board
ESP32-C6
### Device Description
My own board
### Hardware Configuration
NO
### Version
v3.0.2
### IDE Name
ArduinoIDE
### Operating System
Windows
### Flash frequency
80
### PS…
-
## If you believe there is an issue with the firmware itself please follow these steps:
1. Describe your problem;
Everything looked fine when I have recieved FC from the manufacturer
Betaflight co…
Be133 updated
2 weeks ago
-
Hello.
Clipper 12 requires an update of the MCU firmware.
How to upload it to the board? After the "make flash", download the firmware.bin from the host, and write it to the SD card as standard and…
-
### Describe the issue you are experiencing
I have a Raspberry Pi 3B and a 3B+
Using both Raspberry Pi Imager and Balena Etcher:
The 3B can boot HAOS, Octoprint, Pi OS
The 3B+ can boot Pi OS…