-
After a lot of headaches checking and rechecking all the hardware and almost giving up. I have verified that there is a serious bug in the firmware.
If you repeat the same gcode file over and over ag…
-
Hello. Please advise me how solve below my problem
I made laser machine myself with grbl 1.1h firmware.
Everything fine, good working, But when i move X axis or Y even Z, under laserGrbl or other la…
-
HI I've got an Atomstack X7 and it looks like they use this firmware, the web interface config is missing on startup as expected, I have uploaded the file from here and this got me the working interfa…
-
I am having a hard time connecting to a fresh install of GRBL ESP32 using a serial connection. I am running the TestDrive configuration to keep testing as standard as possible.
I have seen the issu…
-
### Version
2.0.20
### Hardware / Firmware
GRBL 1.1
### What happened
I might be doing something wrong, but I encountered this:
After Homing, when machine is at X0Y0Z0, if you press return to …
-
I am trying to connect my arduino mega 2560 via ugs but it says
"Connected to Grbl
The setup wizard does not know how to configure this type of controller.
It needs to be configured manually."
ple…
-
Good Morning.
I am compiled in Qt 5.4.2 (MSVC 2013, 32 bit) and it works everything except the status that is always locked in unknown after the connection. What can I do to correct this?
Thanks…
-
Hi. How could I use the MKS-DLC32 to control a servo to use it as a pen plotter?
-
1. Loaded newest version of Arduino 1.8.13
2. Loaded GRBL library in C:\Program Files (x86)\Arduino\libraries\grbl
3. Disconnected all cables from the board except USB and external power supply
4. …
-
Hi,
I am using UGS Plattform Nightly 201609300101 with GRBL. I built a hardware pendant which produces G-Codes for Jogging, Feed Hold, home, probe etc. The pendant's tx wire is connected to GRBL's RX…