-
When we convert something like an AIRR `Study` to an AKC `Investigation`, they are identifiers from the AIRR world (e.g. `study_id`) that need to be maintained in the AKC. In this case, the AIRR study…
-
I tried everything but couldn't ?
analogRead(PA_2) ?
analogRead(PA2) ?
all all return 0 :(((
but when i use it digitalWrite(PA2) this not output 3.3v !!!
plssss help meeeeeeee
-
Model: 4.7-S3 , V2.3
[ 16458][E][esp32-hal-adc.c:158] __analogRead(): Pin 36 is not ADC pin!
This comes on serial when it tries to read the battery voltage
The board would only work when conn…
-
https://github.com/Ezcal/ece411/blob/master/ADC
-
Hello Rafael,
I am interested in using your library to read the ADC pins on a beaglebone. I have the library completely built and it compiles code correctly. The problem I am running into is that al…
-
Hello!
have you implemented the ADC (analog inputs) in your code too?
-
@codecubepi , @npetersen2 -- collecting a plan on how to handle AMDS releases:
# Versioning Approach
Per [this comment](https://github.com/Severson-Group/AMDS/pull/48#issuecomment-2351297892) lets…
-
### Firmware Version
All
### What did you do?
Try to set ADC multiplier override but unable to because it’s only available on esp32 devices.
### Expected Behavior
To be able to set the…
-
编译环境:
- 平台:window11
- esp-idf版本:5.1.4
报错情况:
- 操作:桌面端已正常编译通过。在编译esp32端时,使用 ESP-IDF 5.1CMD 进入到\platforms\regina后使用idf.py build 出现报错:'esp_ble_gap_ext_adv_reprot_t' has not been declared
- build lo…
-
```
adc_get_value_mv had a hardcoded value , replaced it for the correct variable
```
Original issue reported on code.google.com by `weimara...@gmail.com` on 17 Jun 2011 at 7:49
Attachments:
- [adc.…