-
I have generated some G code with [Flatcam](http://flatcam.org/) and as usual opened it with bCNC and it did not show the complete design.
At first I did not really notice it(even it was very obvious…
-
### Description of the bug
The title sucks, but I have a problem I can fix one of two ways.
I need to place a GCode command at the end of my GCode file, informing my printer how much filament I've…
-
Installed the plugin and tested it, to my surprise it did work on my setup.
One problem though, it messages me on every layer change with a spoken message which is not related to the choosen option…
-
**Describe the bug**
Clicking from sliced preview to Gcode preview causes a completely blank screen
**To Reproduce**
Steps to reproduce the behavior:
1. Go to 'Click on 'configuration > preferen…
-
even though the part cooling fan is set in slicer to be off for the whole print it is at 100% as soon as the gcode is loaded... unsure how to fix this myself, tried double checking the printer.cfg for…
-
Without actually inserting a dwell command into the gcode is there any way to in firmware increase the amount of time it waits after an `M3 Sxxxx` command?
I'm using firmware modified to control a se…
-
My 20mm test cubes come out at X20.05mm by Y19.9mm so I think I need to adjust the Y Axis steps per mm. Do I do this in my firmware, slicer (Simplify3d which produces gcode) or the the machine setting…
-
So I have built a fixture plate for my XCarve / XController. I now wanted to write a UGS macro that:
1. Retracts the spindle
2. Moves (in machine coordinates) to the known zero point of the fixtur…
-
### Application Version
5.1.0
### Platform
windows 11
### Printer
Creality CR-6 SE
### Reproduction steps
I tried to print CR6SE_Christmas_Ball_Lattice_with_Small_Twist(1) from thingyverse It t…
-
## Here are the steps I follow to reproduce the issue:
1. Open StepConf
2. Basically click forward all the way through a new config. I selected to use Gmoccapy and changed pins for axis A to unused, …