-
## Expected Behavior
I'm trying to upload a set of parameters from a .param file, and I'm expecting the system to upload the parameters and give an OK.
## Current Behavior
The program crash (segm…
-
#### Issue details
If a python script is started before connecting an aircraft (as occurs when conducting a command line launch with the -script flag) or starting a simulation some cs values (cs.lat,…
-
### Describe the bug
A bug occurs during landing when using only the lidar sensor for altitude. Manual and automatic are the same.
### To Reproduce
ekf2_ev_ctrl 0
ekf2_gps_ctrl 0
ekf2_baro_…
-
**Describe the bug**
Drone flies perpendicular to geofence on takeoff close to geofence. The drone places a setpoint ~7 m away from launch point and tries to reach it aggressively. This is very dang…
-
## Expected Behavior
Purple Cube should autoconnect to QGC without having to manually connect through the connection manager.
## Current Behavior
Purple Cube is not autoconnecting to v3.5.0 or latest…
-
Hi, Which flight controller software is used for testing? can we use PX4 or Ardupilot? @antonilo
Thanks
-
**Issue Details**
When performing a calibration, the process just goes through without me having to blow into the pitot
After above-mentioned calibration, the speed with no wind reads at ~9m/s or ~3…
-
APM_Planner v2.0.15-rc4 (also in previous versions)
MAV_001: ArduPlane V3.1.1
MAV_002: ArduCopter V3.1.5
Problem: While connected to two vehicles via UDP, changing the flightmode of one vehicle, caus…
-
### Describe the bug
Hello.
I want to simulate it on Gazebo in conjunction with the actual drone that removed the propeller.
The reason for using a real drone is to check with a simulator how the p…
-
![image](https://cloud.githubusercontent.com/assets/1847818/9358006/fb434236-4657-11e5-821b-b0ca2ff90f7e.jpg)
As far as I can tell, everything here is correctly built. I can't find which output ports…