-
Hi,
I'm trying to calibrate a thermal camera with a Velodyne VPL 16. While running the coarse calibration I'm getting the following error:
[pcl::SampleConsensusModel::getSamples] Can not select …
-
Hi !. I am wondering if there is a possibility of performing re-id of persons using thermal camera images ?
Understand that there will be difficulty. Because the heat signature of a person is very…
-
### What's happening?
I want to use the CodeScanner with the torch already activated but it doesn't work.
If I use a button to turn the torch on while using the Codescanner then it works but I wou…
-
Hi Dji,
I get some records (video) on mini 3 Pro with the following code
but on 300 RTK I am getting an error (error code SYSTEM ERROR -7) with no description
```
if (CameraKey.KeyIsReco…
-
Hello, first of all thanks for this project!
I am using a Raspberry Pi 4 with a RPI Cam V2 and a thermal USB Camera ([Lepton 3.5 + PureThermal Mini](https://groupgets.com/manufacturers/getlab/produ…
-
I use PureThermal 2 +LEPTON3.5 windows Lepton User App to use it normally, but the Android system cannot display it using OTG. I used PureThermal 1+LEPTON3.5 again, the same problem, PT2 firmware is 1…
-
Description: When the UAV identifies potential humans, in addition to sending their coordinate locations, the image recorded by the on-board camera at the moment the human is sensed will be stored. Th…
-
hey community!
trying to use libseek-thermal for Nano 300 (289d:0011 Seek Thermal, Inc. Nano300) and get the error in issue subj on init cam
is this a bug or Nano 300 isn't supported yet?
ma…
-
Dear groupgets,
for a longer period of time, we don't get the module to work constantly over a longer period of time. Might there be a thermal or buffer issue with your module?
_Our setup:_
- [PT…
-
Hello,
We have started to notice a kind of fisheye effect in the IR image we capture from the MLX90640 (110FOV) unit, when the measured object is placed ~18mm away from the lens - Is this expected?…