-
I got an issue with the MKS Robin nano v1.1. The print head moves to random locations in the middle of printing, after that printing continues as normal.
I have activated the debugging of the board …
-
Not available yet?
-
[There is some information](https://www.thingiverse.com/thing:3672543) about noisy 5v line if the board is powered via 24v adapter.
I've ran into this problem too on my v1.2.
Temperature sens…
-
Open Source configurations are for old Longer3d motherboards but new LK5 Pro printers are being shipped with MKS Robin E3 V1.1 motherboard. Please provide configurations or a list of changes needed to…
-
Hi here! My setup is MKS Robin NanoV1.2+TFT3.5+PWC2.0. Configuring display online by MKS-tool i reduce space from icon text to low border to 1 pixel. In downloaded .zip file is all right.
![confi…
-
Good afternoon, everyone!
Today I became a happy owner of Microprobe v2.
I have encountered an incredibly terrible problem. On my MKS Robin Nano V3.2 board.
The microprobe stylus does not always …
-
Under LVGL UI with lastest firmware version, as soon as I plug any USB stick, the board freeze and reboot, so I can't print from USB.
For information, I use:
mks_robin_nano_v3_usb_flash_drive
#de…
-
Hello, I am having the no printer attched issue with my printer. I have an Ender 5 plus with an SKR 3 EZ and a TFT50 V3.0.1. I will provide my configuration.h below but I have followed the manual, and…
-
Hello Guys
i have MKS robin nano v3.1 and driver TMC2209 in uart mode.
I like to use the standard sensor and disable the sensorless, but i don't find how i can do it.
Please some one can explay how…
-
hey, I was trying to get UART working for my 2209 drivers (BTT 2209 1.2) and im getting TMC Connection Error on the screen.
what is your wiring setup for UART?
I was following this guide on yout…