-
Hi Kris
I build my own uP board with bluetooth (rn42), mpu (9250), a atmega32u4 @ 8MHz and a battery charging chip. My goal is to have a sensor for rotations for a research project. Here a small mo…
-
Hello,
I need iNav to use the MPU9250 at its 'high' address.
-> Maybe address selection for the sensors could be implemented in the configurator ?
Setup :
(SPF3) (MPU9250 Module)
The…
-
Hi,
Nice work of this camera imu calibration tool. It's easy to use, thanks guys.
I managed to get several calibration results, but I'm confused to choose one of them, since the transformation mat…
-
``` bash
~/ardupilot/libraries/AP_Baro/examples/AP_Baro_BMP085_test# make linux
make: Warning: File `../../../../mk/find_tools.mk' has modification time 4e+02 s in the future
HAL_BOARD=HAL_BOARD_LINUX…
-
I am using the MPU9250 on a rpi zero W, on Raspbian Jessie
node version : v6.10.2
When doing sudo i2cdetect -y 1 , I can see the addresses : 0x0c and 0x68
I have tested the every script and nothi…
-
missing pyb import when run test code.
-
I'm trying to interface MPU9150 with Raspberry pi with raspbian jessi installed on it. When I tried to fetch repositories for it, I got the following error
-
I am writing a driver for the MPU9150 IMU. I am attempting to read a byte from a specific register and am always getting back the value from the first register on the device.
The sysfs i2c implement…
-
Hello! I faced a trouble whith upm's Mpu9150 moudle.
My Mpu9150 is like this
MPU-9150 G…
-
Initial boot with Dev Image debian-8.6-orov_dev-armhf-2016-11-22
Came up in the notification panel after first boot.
>Nov 22 07:20:44 OpenROV orov-cockpit[661]: FIRMWARE UPDATE: "avr-g++" -c -g …