-
Tarkoituksena rakentaa kaksdeetä paperille tussaava piirturi. Voimansiirto toteutetaan kahdella askelmoottorilla ja hammashihnoilla. Tussi lasketaan ja nostetaan käsin. Johteet on 12mm alumiinista pyö…
-
All sensors we plan to use are listed on the electrical team whiteboard. Try to test at least one of each on the RoboRIO. Create a separate branch for sensor development and implement each sensor di…
-
I found this project while googling for CNC upgrades and I'm fairly enthusiasic about it! Awesome work @bdring !
However, it seems the only readily available boards are the ones on Tindie from Bart h…
-
Under Windows, I need to access device's friendly name (`SetupDiGetDeviceRegistryProperty` with property `SPDRP_FRIENDLYNAME`).
This information is not part of `libusbp::device`. May it be added to…
-
I bought an Arduino Mega with a Motorshield and an Ethernet shield 2. Over usb it works perfectly with the controller, but I can not get the Ethernet shield 2 to run with the DCC Software. Is it corre…
-
To prevent dangerously high LC spikes, Pololu recommends placing a 100uF capacitor across the rails of each driver, as [outlined here](http://www.pololu.com/docs/0J16/5).
Currently, a single 100uF ca…
-
The proposed example set inter-measurement period to 50ms and setMeasurementTimingBudget to 50ms too.. but the datasheet state you need to set inter-measurement at least 4 ms higher or you will get an…
-
I've been looking into finding a compatible motor controller board that can be used to power and control 4 NEMA 23 stepper motors. 2 of these will be moving the X axis.
I already have a [gshield v5](…
-
SBC: Rpi 4B
OS: Buster Desktop
DC: Dev 4.3
[myconfig_BYRD.zip](https://github.com/autorope/donkeycar/files/6983604/myconfig_BYRD.zip)
I have found a strange oddity while working with integration…
TCIII updated
3 years ago
-
Is there a list of supported motor shields that can be used with this? For instance:
1. 2A MOTOR SHIELD FOR ARDUINO from DFRobot
2. L298 Dual Bridge DC Motor Driver Shield 2A
3. Arduino Motor Shiel…