-
Currently it fixed by feeding module with 3V3 bus, but test bench Wemos D1 worked on 5V without any issues.
Need to figure out why so.
[WORKAROUND](https://github.com/SequoiaSan/FlipperZero-WiFi-…
-
Hello,
Thank you for the usefull library!
i'm using your FFT library to realize a spectrum analyzer.
For testing i connect a 150mVpp sinusoidal wave with a 500mV DC value to Arduino SAMD21 DAC A0 a…
-
Configure the TRX module with TDD mode
Issue-TDD is not configuring in the TRX board with TDD package and configurations
- Run E2E mode test in TDD and check the below parameters
- Spectrum
- EV…
-
```
After using a protocol analyzer to sniff the interface between the SPEkTRUM MCU
& the tx module, I suppose DSM2 header of Open9x is inaccurate.
Both X1TXN & X1TXO had been tested.
The first byt…
-
Is it possible to make show peaks to stay persistent ?
-
Most (all) digital oscilloscopes have a variety of different acquisition modes.
Acquisition modes are tuned sampling algorithms that give you unique insights into signals. By varying the sample ra…
rgetz updated
4 years ago
-
```
After using a protocol analyzer to sniff the interface between the SPEkTRUM MCU
& the tx module, I suppose DSM2 header of Open9x is inaccurate.
Both X1TXN & X1TXO had been tested.
The first byt…
-
```
would be great if..
add tabs in the play list (aimp2 style (try it) 2.x version)
- adding folders by drag and drop (very handy feature)
- tabs wheel scroll
new playlist, add folder, file, play…
-
Hi there,
when I tried to add controlled vocabularies to the parameters of protocols in my **Investigation** file, the validator gave me the following error: `Problem while mapping the class 'Protocol…
-
Dallas and Mohit are working on a raw adc flagging algorithm. Once this is done and things understood better (thresholds used to consider a channel as bad), make an analyzer.