-
Following succesful login, browser displays white/blank screen.
Bisected and this error came in on the npm version above, and persists on the latest version. ( meshcentral@0.3.8-v at time of writti…
-
**What happened?**
After upgrading PeerTube from v1.2.1 to v1.4.0, the web interfaces became zh-Hans-CN (Simplified Chinese) instead of zh-Hant-TW (Traditional Chinese). And there is no wher…
-
Howdy All,
I am replacing my Ultimaker v2.1.4 board with SKR v1.3 w/TMC2208 UART. I am not able to connected any Win10 PC to the SKR board via USB after re-flashing to Marlin 2.0bugfix. Getting a …
-
Hi,
So I'm currently trying to replace my Creality CR10 S5's motherboard with a SKR 1.4 Turbo. I purchased this along with TMC 2208 v3 Drivers. So far I've got most things working, from the motors …
-
```
Marlin/src/lcd/menu/menu_delta_calibrate.cpp: In function 'void _man_probe_pt(const float&, const float&)':
Marlin/src/lcd/menu/menu_delta_calibrate.cpp:42:76: error: 'DEFAULT_XYZ_STEPS_PER_UNIT…
-
We have an error at 2019-07-24 08:27:40.802 when de serializing document
faf75afde8f642e4672d8c865f45104e9a07399a008b50d6c16456d125bbb28e
```
parentDocument=24e4b217e7e90bfac33e9e128b837c9200957…
-
Using Debian Buster, Marlin at commit c28e08c8, running an SKR v1.3 with a brand new RRD 12864 display (BigTreeTech red PCB model with contrast pot, via normal cables that needed no twisting/flipping/…
-
This is Marlin bugfix-2.0.x branch, commit 61225e68, running on an SKR v1.3.
### Description
For a while, I've been having problems with my hotend staying... well... hot. At the beginning of a …
-
1. do not insert sd card
2. slow lcd respond with 0.5 sec for each line refresh
3. insert sd card
4. it become normal operation
5. take out sd card again
6. slow lcd repsond again ...
Regards
…
-
Hi. I have problém with heating bed
If i set some temp heating stop 10 degree leds for example set 60*c hotbed stop heating 50 *c
But If i try calibrate PID heating is ok
Please help
Marlin fi…