-
### Bug Description
This is Marlin bugfix-2.0.x, commit 0ebd2f44, running on a newly-built Hypercube with SKR v1.4 controller (which has TMC2208's on X, Y, and Z, and A4988 on E) and RepRapDiscount…
-
Hi. I have problém with heating bed
If i set some temp heating stop 10 degree leds for example set 60*c hotbed stop heating 50 *c
But If i try calibrate PID heating is ok
Please help
Marlin fi…
-
**Describe the bug**
BetaFlight 4 AND Release Candidate 6: **Smart Audio 2.1 NOT working with TBS Unify Race 2 VTX**.
_When VTX was swapped out to a TBS Unify Pro 5G8 HV the Smart Audio functioned c…
-
Hi,
So I'm currently trying to replace my Creality CR10 S5's motherboard with a SKR 1.4 Turbo. I purchased this along with TMC 2208 v3 Drivers. So far I've got most things working, from the motors …
-
Today i finded this terrible bug, that makes my machine inoperative.
For some strange reason, if you add to the firmware the config options of a delta, and enable big things that costs a lot of memor…
neox3 updated
4 years ago
-
### Bug Description
The TOUCH_UI_FTDI_EVE does not work on marlin 2.0.1 or 2.0.x
i tried on Ramps, Arduino, SKR Pro, Fysetc S6 and SKR 1.3
the compiling issue https://github.com/MarlinFirmware/Mar…
-
1. do not insert sd card
2. slow lcd respond with 0.5 sec for each line refresh
3. insert sd card
4. it become normal operation
5. take out sd card again
6. slow lcd repsond again ...
Regards
…
-
This is Marlin bugfix-2.0.x branch, commit 61225e68, running on an SKR v1.3.
### Description
For a while, I've been having problems with my hotend staying... well... hot. At the beginning of a …
-
Hello, the mainly config like below:
```cpp
#define Z_DUAL_STEPPER_DRIVERS
#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
#define Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP…
-
```
Marlin/src/lcd/menu/menu_delta_calibrate.cpp: In function 'void _man_probe_pt(const float&, const float&)':
Marlin/src/lcd/menu/menu_delta_calibrate.cpp:42:76: error: 'DEFAULT_XYZ_STEPS_PER_UNIT…