-
I have the impression that fix.lon_err_cm and fix.alt_err_cm / fix.lon_err() and fix.alt_err() are swaped by the parser.
-
Hopefully this is the right place for this, please let me know if I should post this elsewhere.
I've been working on my first GPS-equipped quadcopter after many micros and racers, using an Omnibus …
-
Hi guys, my pos hold issue continues. When I switch on nav poshold, it rounds around holding position for one time and holds in the air at the right position.
My SP Racing F3 and ublox m8n gps use…
-
PX4 does not appear to support the GPS_STATUS message. I was hoping to use MAVROS to gather the SNR (C/N0) values to each satellite in view from my multirotor in flight. Currently MAVROS itself does n…
-
Hello,
Probably not a firmware issue but I thought posting here might save others time and frustration. I am using an Omnibus F4v3 for my latest build and found that my laptop will not reco…
-
Hello everyone, I would like to connect my GNSS of virtual robotix that has a neo m8n ublox GNSS receiver with my esp 12 via SPI.
I set the GNSS module in SPI mode via UART... done. But I cannot fi…
-
Despite @markwomack getting the GPS working last night, this afternoon I was unable to get a fix either with the external antenna nor the onboard patch antenna.
-
### Issue details
mavros does not appear to support the GPS_STATUS mavlink message, which contains info about the GPS satellites in view:
https://pixhawk.ethz.ch/mavlink/#GPS_STATUS
It looks …
-
I would like to use GPS on the I2C bus.
I have this GPS http://www.csgshop.com/product.php?id_product=184. It is a Ublox NEO-M8N module with tri-band antenna for GPS, GLONASS and BeiDou. It also has …
-
Hi there!
I've connected a uBlox NEO M8N to the UART2 serial of my Naze32, and a Minim OSD to UART1.
I've configured the Minim OSD to display GPS Time alongside the GPS coordinates, though when GPS …