-
While the software/hardware seems to work (I can detect all my i2c devices fine), I'm trying to see what a specific chip is receiving, or at least see whatever is being sent on the I2C bus. Can CH341A…
-
Since the PocketSDR cannot be readily found assembled, I am trying to see if I can get the proposed code to work with a single MAX2771 as found on the evaluation board
https://www.analog.com/en/resou…
-
Nice project. I wrote a simple high-speed logic capture firmware for the AVR atmega8 a few years ago, and have been thinking of doing something better with the STM32 ever since. I have a fx2lp-based…
-
Currently we use the fxload tool which is written in C. The code for the tool can be found at https://github.com/libusb/libusb/blob/master/examples/fxload.c and https://github.com/libusb/libusb/blob/m…
-
Support ultra cheap Logic Analyzer USB 2.0 HS with 24MHz SMSP 8 Chan based on Cypress FX2 chips
More details here: https://sigrok.org/wiki/Fx2lafw
Example of what we can find on Internet for less …
-
```
Hi David, At K-2 to K-3 of your receiver schematic.pdf can I delete the u3, c25
and connect 3V3FX2 to c29 as power supply? Thanks!
```
Original issue reported on code.google.com by `extrava..…
-
Currently litescope supports dumping sigrok data. It would be awesome if instead you could just use a LiteScope system like any other sigrok board.
-
```
Hi David, At K-2 to K-3 of your receiver schematic.pdf can I delete the u3, c25
and connect 3V3FX2 to c29 as power supply? Thanks!
```
Original issue reported on code.google.com by `extrava..…
-
```
Hi David, At K-2 to K-3 of your receiver schematic.pdf can I delete the u3, c25
and connect 3V3FX2 to c29 as power supply? Thanks!
```
Original issue reported on code.google.com by `extrava..…
-
```
Hi David, At K-2 to K-3 of your receiver schematic.pdf can I delete the u3, c25
and connect 3V3FX2 to c29 as power supply? Thanks!
```
Original issue reported on code.google.com by `extrava..…