-
resources (papers, code, posts, videos) related to turning algorithmic art into physical art pieces and installations
-
### Controller Board
Pen plotter run with simple diy circuit such as Breadboard.!
### Machine Description
Pen plotter
28byj-48 as x axis motor.
28byj-48 as y axis motor.
sg90 as z axis motor…
-
Hello everyon, I would like to know which version of MKS-dlc32 firmware should I use for controlling a pen plotter with it and also the LED TS35 screen
In order to run the pen plotter, the Z axis…
-
The `Plotter` should:
- contain a `Camera` and its position (i.e. its offset from the pen)
- expose methods such as `move_pen_to()` and `move_camera_to()`
- *If* we want the `follow()` method…
-
We have two pen plotters for the course:
- an [A3 iDraw](https://uunatek.com/products/uuna-tek-h-version-pen-plotter-a3-size-handwriting-machine-xy-plotter-laser-engraver)
- an [A2/A1/A0 iDraw](htt…
-
Z-Hop (and Z Hop Height) is needed for use cases like cutting or pen plotting in order to avoid travel lines:
https://ultimaker.com/learn/transform-your-ultimaker-in-a-pen-plotter
-
**Describe the solution you'd like**
It would be very useful to be able to modify the start and end g-code that Makelangelo software generates.
While we can **add** user g-code to the plotter sett…
-
![IS7P0{A9 K{LO IH4V_C0IF](https://github.com/svenhb/GRBL-Plotter/assets/94118847/68723f19-c294-4293-8173-1b98fc7bdfa5)
May I ask how to set the tool table above the Y-axis? After setting, the pen …
-
It would be really helpful if it was possible to adjust the speed during printing/plotting. This way, when you see a pen can't push the ink out quick enough you can slow down the plotter without havin…
-
Hello,
I'm using the TMC2209 Pen Laser V2.0 board. It's running a coreXY pen plotter with pretty standard Nema 17 motors. The issue is that I'm having is that the motors stall very easily. Simply by …