-
Hi i have an old turnigy pwm receiver for my drone.
I'm looking for a way to convert the several pwm signals to s-bus.
Can i use this code?
Or is it ment to be used the other way around?
Kind rega…
-
I'm looking inside the C source code, can someone explane the following function? Especially the used values.
```
void picoemp_enable_pwm(float duty_frac) {
if(pwm_enabled) {
return;…
-
Hello!
I was wondering whether PWM is used interchangebly with PFM in the motif collections?
It says "The files named metacluster_*.cb contain position weight matrices (PWMs) for multiple motifs." …
-
SuplaDevice posiada obsługę expandera.
może da rade dodać go do gui-generic.
-
I want to use the pwm cooler, but i don't find an order how?! To set on the boot config ! Need help !
-
As there is no dedicated port for pwm fan with four pins, i would like to know if it is possible to use PG10 to control my fan ?
https://noctua.at/en/nf-f12-industrialppc-24v-3000-sp-ip67-pwm
I beli…
-
I'm using Fan Control for a year now, and anything else is set up and working fine. But never been able to control the pump from that software. I was able to do it from Gigabyte's SIV control softwar…
-
### Description
TODOs defined in [PWM Effort Scoping](https://docs.google.com/document/d/1hW_KjRlW15me6V13GP0MHypB2iLbyrtvcwgO26v4Fgk/edit#)
./dv/env/pwm_env_cov.sv:208: //regwen_cg = new(); // TO…
-
Implement PWM control servos. This should include a wrapper API and a higher level get_angle, set_angle, etc. It should have an init function to configure GPIOs if needed.
https://docs.espressif.…
-
//Controlling speed (0 = off and 255 = max speed):
analogWrite(9, 100); //ENA pin
analogWrite(10, 200); //ENB pin
//(Direction)
digitalWrite(motor1pin1, HIGH);
digitalWrite(motor1p…