-
I want to run ACT tests on a real riscv board, is there a way?
I found this comment https://github.com/riscv-non-isa/riscv-arch-test-reports/pull/2#issuecomment-1463397890. They seem to be using gd…
-
Hi there,
First of all, thank you for your efforts in creating this system! I recently purchased the Sipeed Tang Primer 25K (Gowin GW5A) along with the PMOD Joystick Kit. I followed the instruction…
-
I used the following command`litex_term --images=images/boot.json /dev/ttyUSB1`to import the linux image into the sipeed tang primer 20k development release，but the serial port command line never appe…
-
https://wiki.sipeed.com/hardware/zh/maixIV/m4ndock/FAQ.html
-
Hello,
can you please add boards supported by apicula project?
https://github.com/YosysHQ/apicula
Namely:
Trenz TEC0117: GW1NR-UV9QN881C6/I5
Sipeed Tang Nano: GW1N-LV1QN48C6/I5
Sip…
-
Hi,
I have been trying to build A53 with defconfig of `defconfig sg2002_licheea53nano_sd` from this repo. But it ended up with
build failure. i think It is failed in ramdisk build.
```
[TA…
-
目前v0.3版本的 ruyi list 查询结果如下：
ruyi list
List of available packages:
* board-image/buildroot-sdk-milkv-duo-python
- 1.0.7 (latest)
* board-image/uboot-oerv-sipeed-lpi4a-16g
- 0.2309.1 (late…
-
While running it as
> ./litex-boards/litex_boards/targets/sipeed_tang_nano_20k.py --toolchain=apicula --build
getting this error
```
INFO:SoC:Initializing ROM rom with contents (Size: 0x64e…
-
Hi,
I am using the latest image here on a NanoKVM basic edition from AliExpress, and then updated to 2.1.1 after booting. I have noticed that after scp-ing over an iso file, when it is mounted, the…
-
https://wiki.sipeed.com/hardware/en/logic_analyzer/combo8/use_logic_function.html