-
One nice feature in SDR# is the ability to stick the VFOs to the their frequency, so when you move the spectrum the VFOs stayed in place in relation to the spectrum.
I searched in the issues and I …
-
I am running a .bat : rigctld -vvvvv -m 3072 -r COM1
It's not working with adjusting the frequency as GPredict makes doppler shift adjustments. If I change the radio control Downlink frequency it g…
-
## Steps to reproduce
Attempt connection to an IC-705 (or other modern Icom radio) using the incorrect serial port. (For example, on my MacBook Pro, `/dev/cu.usbmodem143201` is the CI-V port and `/…
-
Connecting remotely to a RPi4 from windows desktop using SDR++ Server as the source and running sdrpp -server on the RPi - Full IQ option is ticked and I cannot untick it, to reduce bandwidth and incr…
-
```
What steps will reproduce the problem?
1.In VFO mode, VFO A; set offset (menu 26) to any nymber, exaple 00.600
2.In SFT-D (menu 25) set it to - (negative)
3.Download the device configuration.
4.Lo…
-
Using VFO A/B switch causes the radio to reply with an unexpected FT1 response when changing to VFO B and FT0 when changing to VFO A.
This may be cosmetic, but since the VFO change is using an "FRx…
-
Steps to reproduce:
1. NICMODH3_v7.9a_240702.BIN
2. Enable Narrow FM reception
3. Move to VFO mode
4. Set squelch to any value other than zero
RESULT:
Squelch opens for about 200 msec but then …
-
When trying to work a DX station in a pileup, I often use the Rev button (reverse temporarily VFO A and B) on my K3, to see what is going on where I transmit. Looks like the radio does not respond to …
-
When I connect the rig, which was previously scanning memory channels, it sets it into VFO mode at static frequency. I then have to walk over to the radio to set it back to mem scanning. It does this …
-
Hi
In split mode it is not possible to see which of the VFOs is currently connected to the mouse wheel or the ECoder wheel. When switching with mouse wheel click or change VFO A / VFO B on the ECoder…