-
Specifically, I'm interested in the e2c, but the HTTP API seems almost identical to the e2.
The docs can be found [here](https://github.com/imaginevision/Z-Camera-Doc/blob/master/E2/protocol/http.m…
-
Hi all,
in the [Jacobian computation of EdgeSE3PointXYZ](https://github.com/RainerKuemmerle/g2o/blob/master/g2o/types/slam3d/edge_se3_pointxyz.cpp#L112) the first 3x3 block (i.e., J.block(0,0)) is al…
-
I'm trying to connect a zcam e2 at pc from uart in db9 connector.
What is not clear, is If this connector accept ttl level. I'm using a usb to ttl converter and I'm unable to connect.
My software wo…
-
```
j5_zoloto/backends.py, line 36, in __init__
self._zcam = self.camera_class(
TypeError: 'property' object is not callable
```
The property is called on `self` instead of the class which …
-
Recently, the python-breadboard-client has been experiencing frequent JSONDecodeErrors, which means that any method/function which relies on calling the breadboard client might be unstable, for exampl…
-
Hi first of all thanks for the code.
When I did the inference on GTX 1080 Ti, the speed was 5 frames/sec with a resolution of 640, 384.
In the paper, it has been mentioned that the speed on Titan…
-
- [ ] During warmup, allow the unspawned players on teams to not have their views locked, so that they could freely roam like spectators (but unlike proper spectators, they would not be allowed to use…
-
Hi, is there any change to use the autoexec.sh to turn on wifi or clear settings on startup?
My back screen is not working and neither are the buttons, so I need access thru wifi to setup everything …
-
Hi Ragnar, first of all thanks for all these documents you put online, Im building a remote controller for the Zcam and I probably wouldn’t have succeeded without your help.
My problem is that I can’…
-
>Triggering EspLog from zcam could be possible over wifi.
>
>Check what your browser shows when you navigate to http://\/ctrl/mode?action=query
>
>_Originally posted by @VladimirP1 in https://gith…