-
### Description
I would like to use [buildroot](https://github.com/buildroot/buildroot) to build linux kernel + rootfs and use it for renode board.
### Usage example
```
I followed some hints …
-
I have a Zybo Zynq 7000. If that is not easily supported by your tools, can you please provide a recommendation for any open source tools which might support it?
-
Dear IPBus developers,
I am working at the European Synchrotron (ESRF) in Grenoble, developing electronics for instrumentation and data acquisition systems. I had the opportunity to learn and use …
-
# [Embedded] ZYNQ-Secure Boot Flow
ZYNQ的secure boot方案提供了三大特性的验证:
* 保密性
* 信息完整性(防篡改,防数据破坏)
* 认证(防否认、中间人攻击)
ZYNQ在secure boot的支持上提供了:
* Hardware Root of Trust (HWRoT) 作为可选的 对于所有分区进行加密
* HWRoT …
-
While working on a target using Zynq7000 cpu I stumbled upon a problem with decoding the address space / selecting suitable bus to perform operation on CSRs.
I’m trying to add a single non-LiteX peri…
-
Whenever fesvr-zynq is executed (even without the `pk hello` arguments), the entire system hangs (verfied with xmd). The following steps were taken to find the issue:
* Verified that the bitstream …
-
Hello,
i have an xc7z Zynq as an Equivalent to the artix 7 and want to disable the DDR and use a HyperRam in some run-Modes for power optimization. The Zynq 7000 Modules aren't part of the compatibil…
-
I have a zynq_zybo board which has a built-in UART, connected to my lab server via a micro-USB cable. The UART appears when the board powers on and goes away when not.
At present I am seeing this o…
sjg20 updated
2 months ago
-
Could you please add MMCM to the Zynq7 parts? That's half the PLLs on the device, and the more accurate ones, at that. I'd try to do it myself, given that it appears to be nothing more than copying …
-
I am trying to compile this plugin on Ubuntu RootFS for a Xilinx Zynq UltraScale board; however, no guide for "Making" the content of the repository seems to have been provided and I am currently stu…