-
Generic i2c_nav board has pins for connecting a sonar. There should be a possibility to read from it.
-
A flight log with two active GPS modules shows 23 GPS glitches in 5 minutes of flight, while GPS conditions were OK (HDOP
-
I flashed "iNav 1.0 release" to my FLIP32 10DOF board today, then tried to set up with CF Configurator 1.2.0, just as I did before with older FW versions on this FC before:
CONFIGURATION:
- Softseria…
-
Hi!
I use Arduino UNO and Neo m8n clone and like to control my scrolling clock with NMEAtimezone code. But when I want to see Daylight Savings Time added in real time I can't see it. For this I open …
-
I'm having fishbowl effect on this setup (see title). It happened first a year ago on iNav with different frame, etc. Now, I took same FC and put on brand new frame and it's happening again. 6" props …
-
# A - Description
Smartaudio with TBS Unify Pro 5G8 HV Race Edition not working on newest Cleanflight 2.1.0 and SP Racing F4 EVO stacked with SP Racing F3 OSD/PDB.
On same system flashed with Beta…
-
### Expected behavior
Read/Write correctly
### Actual behavior
SCL signal does not go up immediately sometime (maybe M8N does not release SCL).
I tried add a while loop to check SCL after set …
zelll updated
7 years ago
-
Hello guys,
We spent a couple of days researching on the Magnetometer behavior of the PX4 with a different Hardware because we are moving toward using 1.6.x version of the firmware.
Lastly we in…
-
Opening this to track our work on getting the POSIX port running on RPi2/Rpi0 hardware combined with the currently available interface shields from ErleRobotics and Emlid.
#### RPi header pinout :
![…
-
Version: 0.6r1
GPS: RY835AI
SDR: N/A
u-blox updated the NEO-M8N firmware to 3.01. Major improvements include the ability to use the Galileo Constellation. Possible issue: [release notes](https://…