-
**Describe the bug**
The motor skips approx every 2 seconds, in open loop as well as closed loop.
**Describe the hardware setup**
- Which motor - 1.8 degreee stepper
- Which driver - Custom 4PW…
-
Thanks for this open project. Can you please write some procedures how to compile. Or add some .Bin files to repository. Thanks and keep it up.
-
Can anyone on "Wiki" describe step by step how to connect and properly control the RPM via PWM-DAC 0-10V. Chinese spindle with inverter? So far, I've done it with the vfdPlugin-1.7.1 plugin in Mach3. …
qulet updated
5 years ago
-
Hi,
Requesting that support for PWM interrupts be added to the `machine_rp2040_pwm.go ` driver, especially handling for the overflow interrupt.
This is required when you want to update PWM duty…
-
Thanks @tjfenwick for his awesome design. To support this project, let's collect and discuss some hardware realizations to potentially improve the original design.
Loadcell rod:
The original desig…
-
Hi James,
Im really struggling with one last bit. When i launch the rur_navigation package on my remote workstation i get two errors "no transform from Laser to Map and no transform from Base_link …
-
What about using a basic pump like the one on amazon proposed in the read me ? Has someone tried ?
Any help with which Arduino extension card to purchase to pilot such a motor?
-
I got 2x 2.1.1 hoverboards. I have unlocked the boards but getting errors when i try to write to them. Tried both STM Util and STM Cube prog with same failures leading me to believe it's not a softwar…
-
can we use this code for bigger bldc motors with esc?
Basically, this system works on small drones according to the study
-
This means that HBridge is built from discrete components and requires two pairs of complementary PWMs to drive it (ie. 4 PWM outputs).
![image](https://github.com/micropython/micropython/assets/7088…