-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I have the following startup issue with the latest release 2.1.2.2, both with the "Current Re…
-
- if LCD display is selected (tested with MKS_MINI_12864, then FYSETC_MINI_12864_2_1/BTT_MINI_12864_V1):
`Marlin\src\lcd\menu\menu_item.h:245:24: error: 'screen_items' does not name a type
245 | #…
-
# GUIDE:
1. You CAN NOT mix PT100/PT1000 and thermocouples:
If you have only one hotend then you can have the following:
- Thermistor (that is an ADC Temp Sensor [uses a pure analog I/O pin]…
-
I am running a TFT 35 E3.0 using firmware BIGTREE_GD_TFT35_V3.0_E3.27.x (Pre-Compiled)
Mainboard SKR 1.3 with tmc 2209 steppers in UART running marlin 2.1.2.2
I cannot get a stable connection be…
-
Our [JR3 driver](https://github.com/roboticslab-uc3m/yarp-devices/tree/b6ab84d920d6748ac778db3023deea3cc9c6e0ec/libraries/YarpPlugins/Jr3) communicates with a massively big PCI board we were unable to…
-
# GUIDE:
1. You CAN NOT mix PT100/PT1000 and thermocouples:
If you have only one hotend then you can have the following:
- Thermistor (that is an ADC Temp Sensor [uses a pure analog I/O pin]…
-
It’s been 3 months + 1 day since #491 was published. Along with #493, a reasonable amount of discussion was generated and some very interesting points were made. We even got a new branch on the repo f…
-
I'm trying to debug an issue with the Giga crashing after a number of hours running. Unfortunately, it seems a number of issues are hampering this:
- `mbed_config.h` has most values disabled includi…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Current Behavior
When building a hello world project using AC6 + CMSIS-6.0.0 I get undefined references to int…
-
### Description
When I boot up my SKR 1.3 Controller with the TFT35 V2.0 Screen (Touch-Mode) my Z-AXIS always moves up "some" height. It's definetely more than 10 or 20, feels like it's traveling the…