-
hello, i use this project to stimulate the process of GPS timing for my device.
I used the brdc in the project and i successfully set my time to 2014/12/20
however, i download a brdc file of 1997. Bug…
ghost updated
8 years ago
-
I think it's time to think about designing a FC specifically for INAV.
Features I want to have on this FC:
1. Future-proof design with an F4 (or even F7) CPU
2. 8 outputs supporting 8/0, 6/2, 2/6 mo…
-
1. Stratux version: v0.8r2
2. Stratux config:
SDR
[ ] single
[x] dual
GPS
[x] yes
[ ] no
type:
AHRS
[ ] yes
[x] no
power source: AC adapt…
-
Since V3.5.1 (working in V3.5.0) BIN log files stored on Pixhawks' SD cards have been zero-extended empty files.
Example of V3.5.0 log:
[6.BIN.zip](https://github.com/ArduPilot/ardupilot/files/241103…
-
connecting the GPS to a softserial port on my flip32 (naze32 clone) running cleanflight 1.12.1 makes the gps connection dropout for about 2 seconds around every 10 seconds, not completly regular (visi…
-
- Background
Prepare driver interfaces demonstration by @bithollow/owners.
- TODOs
- MPU9250
- MS5611
- PCA9685
- Ublox NEO M8N
- DS1339
- ADS1115
- EEPROM(optional)
- Outputs
- sour…
-
I have attached the HEX here for testing iNav target on the RCExplorer F3FC board.
I kindly ask anyone interested with the board to test the HEX. I'm mostly interested if the on-board barometer is wo…
-
While vehicle is powered on and has a GPS fix (according to LED on GPS module), PX4 may sometimes lose all GPS satellites for a short time (couple of milliseconds, as I think), and renew the connectio…
-
In discussions with a user they were saying the signal strength indicator for GPS wasn't working properly. This was because the current boundary values on HDOP for percentages don't match what users w…
-
The GPS serial port for the RY835AI can be connected via USB or GPIO UART.
Add GPS serial port config to stratux.conf to allow switching between the two ports without recompile of RY835AI.go.
Default …