-
----
### Issue details
Hello,
thank you for taking the time to read my request.
My team and I have had a hard time changing the mode of the pixhawk.
It works when we do it through the RC co…
-
Running the stock Ardusub Pi Image, with the Mavlink2Rest 0.6.0 release binary. Vehicle is using ArduRover 4.0 Stable.
When I change the flight mode (in QGC), the Mavlink2Rest server crashes with …
-
not urgent, but are there any long-term plans to implement some kind of ground vehicle/rover support (cars, boats, subs, etc.) to iNav?
csurf updated
4 years ago
-
Hi,
I'm trying to add support for ArduPilot's Rover SITL (http://ardupilot.org/rover/) in Airsim using the Car model.
I have figured out (hopefully correctly!) few of the things which would be req…
-
This aircraft has been flying with v1.8.0 dev which was setup in the same process as described below with no known issues at that time. I upgraded to v1.9.0 stable for some added functionalities and n…
-
[Archived:Connecting the Radio Receiver (APM2)](https://ardupilot.org/rover/docs/common-connecting-the-radio-receiver-apm2.html) - Describe the issue/suggestion and improve the title. Please keep a li…
-
Hello,
I encounter an issue when trying to connect MAVProxy on my laptop running ubuntu 19.10 to an Erle Brain 3 (based on a Raspberry Pie 3) via udp.
On the RPi, I launch this script :
```
…
-
Deliverables:
- Get the PixHawk setup with Ardupilot
- Test to make sure the PixHawk communicates with Arudpilot and ROS running on the Nano
-
Hi,
I've just followed the wiki https://github.com/HD-Fpv/Open.HD/wiki/RC-~-RC-with-Ardupilot,.
Then connected FTDI USB Serial Device converter now attached to ttyUSB0 to local PC and started SIT…
-
I was using /mavros/rc/override on a pixhawk 1 in order to control the rover via an external pc, and this worked just fine. However, i needed to upgrade to the pixhawk 2 (the first one died), and now …