-
the printed middle screw don't grab on the threads. Even in CAD the screw ist floating.
I printed the mid.part with -0.5mm in x and y to fit over the threads, but that didn't work either.
At the …
-
It would be nice to have the ability to control the flow of every entry where you can set the extrusion width and speed.
This way I can print inner perimeters at higher speeds while maintaining the c…
-
Split from #2
1 spirochete
1 ring
1 triangular
1 cell_shape
2 tailed
3 branced
3 spindle
3 star
4 irregular
5 flask
7 sq…
-
I would like to see some get started/Set-Up tutorial for Slic3r Settings.
Reason being is that I see many threads about how to calibrate the Printer (slicer settings). Also I see many bad calibrate…
-
### Description of the bug
I'm printing something that needs a color change. I select the required layer height and add the color change. Then I go to the first color and sucessfully change it to m…
-
### Description of the bug
While printing a part with organic supports (using extruder one for the main part, and extruder two for the support material) the extruder two nozzle strikes the main part.…
-
First and foremost - thanks for this excellent project! As an addressable LED _and_ 3D printing enthusiast, it hits right in my sweetspot. :)
I've got all my parts on hand and ready to assemble - …
-
### Version
Slic3r PE 1.41.0+64Bit
### Operating system type + version
WIndows 10 Pro 17134.285
### Behavior
I have created a new stl file in FreeCAD and transferred it to Slic3rPE.
This f…
-
1. Verify firmware version installed on your printer , to check this on the printers start screen the firmware version will be indicated you can also check which firmware version you already have via …
-
Guys,
Quick update after our call:
1. elastic band - Scott already connect with elastic supplier and they are looking for 10K feet in the Charlotte area. They said it is getting harder to move…