-
Hello,
Init APM:Copter V3.5.5 (27229c83)
Free RAM: 262144
FW Ver: 120
----------------------------------------
Sensor failure: Baro: unable to initialise driver
S…
-
Hi i am unable to install future, any idea how i can fix it? Here is the log
debian@beaglebone:~$ sudo pip install future
Collecting future
Downloading https://files.pythonhosted.org/packages/…
7st4r updated
5 years ago
-
Used the latest beaglebone black image and grabbing arducopter and compiling on debian leaves me with this error when attempting to start ardupilot. I have verified as well that the dtb is being loade…
-
**Describe the bug**
I am in the process of learning how to setup a beaglebone blue to be used with the EduMIP kit. I was successful in my first attempt following all the advice and instructions foun…
-
Hallo @pdp7 ,
I am facing a problem with the gpio module while working with the Beagle Bone Blue. I am trying to set one of the gpio pin to high. While importing rcpy.gpio as gpio, there is an erro…
-
Hi, I'm kinda new to beaglebones. I've used Adafriut_BBIO.pwm for controlling servo motors in beaglebone black, now I'm looking for something similar so I can control servo motors in beaglebone blue. …
-
Hi,
In master, APM1 and 2 aren't in the build list waf gives. I see branches of the project for Plane 3.8.0 and Plane 3.9.0, but the docs suggest the latest Plane version that will run on APM is 3.…
-
Is anyone updating the Adafruit Python library for the Blue?
[2] doesn't appear to have any definitions for the Blue's connectors.
For example, GPIO1_17 appears on the Black at P9_23. On the …
-
I have no battery connected, but running the battery monitor on Beaglebone Blue indicates a compatibility problem:
```
root@beaglebone:~# uname -a
Linux beaglebone 4.4.54-ti-r93 #1 SMP Fri Mar 17…
-
When running rc_test_dmp on the beaglebone blue, it seems the calculations for the heading are wrong.
If the beaglebone's heading is kept at a fixed position and then the board is rolled, the heading…