-
I'd like to run C and assembly level debugging in Eclipse using this product
https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32c3/esp32-c3-devkitm-1/index.html
I played a lot but onl…
-
Hi sir,
For this above issue, can you please provide me the steps to load memtest_shared.bin into board RAM & also procedures to set registers and run memtest86 , i have a RISCV board from si-five.…
-
Hi
I attempted to compile Pulpissimo on ZCU104. It ends up with timing constraints aren't met:
Current Timing Summary | WNS=-7.567 | TNS=-29782.275
The procedure I followed is:
1. download pulpis…
-
Loading devices from SVF files with openFPGALoader take forever.
How difficult would it be to take the SVF parsing from openFPGALoader and run it locally on the RP2040?
It would be nice to be able t…
-
Hi,
I have a 3 year old redox wireless v2 from falbatech and tried to flash the firmware on the chip. However I can't get the openocd container to start up correctly.
I have never flashed somethin…
-
Hi Greg,
I know from what you mentioned on Mastodon that this is untested since you currently don't have hardware but I think you said it compiled for you. There must be some differences in compil…
-
Hi,
Set up a spare Raspberry PI Pico as a Picoprobe (as described in https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf Chapter A) and tried to upload a sketch using a programmer…
-
### Board
Adafruit ESP32 Feather (esp32:esp32:featheresp32)
### Device Description
ESP-Prog
### Hardware Configuration
No additional hardware is required to reproduce this issue.
### Version
v2…
-
Hello,
I'm attempting to use litex_sim to debug an application running on VexRiscv. I've been using the wiki pages: [Use-GDB-with-VexRiscv-CPU](https://github.com/enjoy-digital/litex/wiki/Use-GDB-w…
-
It wont show up in BIOS and zero of the LEDs are lighting up. tried all slots and both show the same result. I haven't flashed it yet or anything. is there anything like hardware related on my pc or i…