-
Hey folks,
I am currently trying to use this on the SDRLab122-16 and it works relatively well with a few changes on Vivado (clocks, 16 bit ADC). The issue I have is that 16 bit values works fine unti…
-
Hello !
I'm trying to use AMP_for_hardware to learn a nice walk on a small bipedal robot. I have produced motion example data in the same format as you used here.
I tried running trainings wit…
-
I made a DUV and a High Speed recording of AO-92 using SDRUno 1.21. When I play the recording in SDRUno and select a 20kHz FM slice and forward the audio through VAC to Foxtelem, it decodes both passe…
-
The documentation at https://docs.scipy.org/doc/scipy/reference/generated/scipy.signal.decimate.html says that the downsampling factor q has to be an integer, but it doesn't really draw any attentio…
-
Thanks a lot to your contribution to the open-source gr-lora! Since this repository has been updated for a number of versions, some new features have been supported, e.g., different spreading factors,…
-
**Feature description**
More flexible FFT configuration. Currently, you can specify an "fft_voverlap_factor" for FFT.
If it is 0, a single FFT per fft display line is calculated. For, e.g, an 10 …
-
Hey everyone!
In short my problem is understanding:
1. Which parameters can be set for rtabmap in Python (_ex. Maker off/on, Laser: off/on etc._)
2. How do i set them correctly in Python?
J…
-
Hi, I am a newbie in rtabmap,I read some point cloud from `rtabmap/cloud_map`, then reconstructed the plane using PCL's RANSAC (using only the raw data from cloud_map) and looked up some colors in it …
-
I'm processing a lot of telecined animation from DVD and find that any IVTC process, including TFM with access to the D2V file, sometimes produces blocky looking frames where it has combined top and b…
-
First, thanks for the awesome work!
I've been trying to decode a local meshtastic network and having poor results (