-
so I run the script, specifically I am running the script: PF_Eval_Kit_MIV_RV32_BaseDesign.tcl, with "CFG3" as the parameter.
It runs, then "POOF" - Libero closes - sort of as if the application c…
-
@cerna
[from PR](https://github.com/machinekit/machinekit-docs/pull/320/files)
There seems to be missing a link in the Docs to any file in docs/developing refereed to by [this file:](https://github…
-
### Describe the bug
- my board build is:
lan: mt7531attached to gmac0
wan: 2.5G phy attached to gmac1
After eth1 working in 2.5G mode for a period of time (such as 10 minutes), mtk_soc_eth w…
-
I opened the blinky project for the M2GL025-Createive Board on Linux in SoftConsole but it won't build and none of the settings for the build seem to be set and paths for files are clearly missing whe…
-
Has anyone gotten the caribou to work on a pi5? if so what steps did you take? I am getting /dev/gpiomem not found as it seems they changed the GPIO access in the 5
-
Hello,
I am currently trying to generate linux image to simulate linux booting on VexRiscv.
To do so, I follows guidelines in src/main/scala/vexriscv/demo/Linux.scala:
```
Buildroot =>
git cl…
-
Just ran an update on a precursor that hasn't been used for several months.
After update finalized, and hard reset, device boots into error from #214 and hangs.
Hard reset button doesn't work an…
-
同学你好,我是MaxXing(似乎没什么用的自我介绍环节
发现这个repo是因为之前注意到你fork了Fuxi、YuLang和GeeOS,于是好奇的我就找到了这里。从那以后,这个repo就成为我每天睡前必读的内容了,不看根本睡不着觉(bushi
考虑到Fuxi、YuLang和GeeOS在设计和实现上可能存在许多坑,并且它们的文档也不完全(根本就不存在吧喂),所以这些坑暂时只有我自己清楚。但这样…
-
Hi,
I'm getting started on FPGAs (apologies in advance for noob behavior).
I've bought a Sipeed Tang Primer 20k ( https://wiki.sipeed.com/hardware/en/tang/tang-primer-20k/primer-20k.html ) and I…
-
Hi Olof,
Thanks for creating serv.
It's the smallest RISC-V CPU I could find so far.
Small enough that it almost fits on the Speed Tang Nano. (It's just off by 100 or so LUTs.)
I saw that you post…