-
### Description
Hello
As mentioned before we are currently doing PPP for the stations here in Luxembourg. Unfortunately these stations are not part of the IGS network and hence not in the GROOPS …
-
When the microstrain is sitting in it's upright configuration (flat on a desk with the mounting holes against the surface) it reports roll and pitch = 0. In this configuration x and y are horizontal…
-
I see that the Google Earth support files (geview.cpp etc.) are in the rtkplot_qt directory, but the ones for Google Maps don't appear to have been ported. I'm willing to dig into that but first want…
-
The crate should become no_std as things that use NMEA directly are often gonna be embedded devices. #13
-
Since this thread is becoming a bit long (even with most of the comments minimized), I've created a new issue as a continuation. I'm going to be closing this issue, and ask that all new feature ideas …
-
The GPS backpack will have to GNSS (GPS) antennas (this enables us to get the actor/subject orientation). These need to be mounted to the GPS backpack.
Constraints:
* The top face of each antenna nee…
-
Hi,
The driver seems to crash if I run it for a longer period of time. It gave a double free or corruption error.
My setup is as follows:
Asterx i3 D Pro+ connected over usb to a pc.
bnc ntrip…
-
### Description
Dear GROOPS Developers,
I wanted to estimate the clock biases using a network of receivers. I have the following:
1). [coreStations.txt](https://github.com/groops-devs/groops/fi…
-
RTCM data can also be obtained from RTCM sources using RTCM clients such as https://github.com/nunojpg/ntripclient or https://github.com/liukai-tech/NtripClient-Tools.
Is it possible to submit a stre…
-
I used the following code and try to send a ESF-MEAS message to F9R module.
Sending messages to F9R is successful, but I failed to generate a correct message using the generator.
When I used the fol…