-
## Current Behavior
MATEKF411 target doesn't work on F411-based Eachine Tyro79. After flashing iNav the board boots and the LED blinks slowly then rapidly over and over, all communication fails. B…
-
Baptiste,
in order to try and get a prototype into a box to calibrate I have used a cjmcu-117 as I think you have.
Unfortunately there seems to be some short on the board as the I2c address keeps c…
-
## Current Behavior
After I upgraded to INAV v2.1 my sonar don't initialize.
Sonar: US-100 (via I2C and Arduino)
# status
System Uptime: 14 seconds
Current Time: 2041-06-28T04:04:00.000+0…
-
## Your Environment
* Plugin version: 3.2.0
* Platform: Android
* OS version: 7.0
* Device manufacturer / model: Samsung SM-G920F
* Cordova version (`cordova -v`): 9.0.0
* Cordova platform versi…
-
status
System Uptime: 28 seconds
Current Time: 2041-06-28T01:04:00.000+00:00
Voltage: 15.16V (4S battery - OK)
CPU Clock=216MHz, GYRO=MPU6500, ACC=MPU6500, BARO=BMP280
STM32 system clocks:
SYS…
-
Hi everybody.
Creat this account , becouse i think this is the only place where i can find help.
I know i know that should be moust simple step to do but for some reason i cannot calibrate my acce…
-
On the most IOS en Android phones the app continues tracking on the background. Now I get reactions of users that after a while (after closing the app) it stops tracking coordinates. When you open the…
-
**Problem**
PR #10116 specifically the introduction of **MPU_DEVICE_TYPE_MPU9250** into the bus options list breaks compatibility for mpu9250/mpu6500 on any supported bus. This parameter essentially e…
-
いずれも従来はhttps://mz4u.net/libs/gc2/ 下のファイルになっており、ここへのリリース作業はgithubリリースと連動・自動化されているわけではないようです。(このサイトのファイルの更新は2018年2月)
とはいえ、jsbjn内のコードなのでこのリポジトリが直接影響を受けるわけではないですが、ここでリリースされたコードが自動的に参照できるようになることが望ましいと思い…
-
## Your Environment
* Plugin version: **2.9.0**
* Platform: iOS or **Android**
* OS version:
* Device manufacturer / model: Occurs on every Android device
* Cordova version (`cordova -v`): …