-
Yesterday in the flight we experienced the following weird behaviour:
> When flying in position controlled mode, the plane suddenly started descending between 1-2 metres.
> After having a look at the…
-
Users of Linux autopilots (such as the NAVIO) may wish to have telemetry coming from UDP forwarded to RX (e.g. from a local (TX) instance of Ardupilot). Is this possible currently? If not, how easy is…
-
Let's keep track about the unit tests on the respective platforms:
RPi1
RPi2
RPi2
Navio+
Navio2
MPU9250 pass
-
I am unable to complete the Accelerometer calibration using QGroundControl.
When I complete the orientation steps, I see a message in the console 'Info: Calibration Succesful'. When I try to arm it,…
-
Opening this to track our work on getting the POSIX port running on RPi2/Rpi0 hardware combined with the currently available interface shields from ErleRobotics and Emlid.
#### RPi header pinout :
![…
-
Hello,
I don´t know if this is the right place to post a question like this, but I´ll try.
I´m new to Python and programming in general, but I´m learning.
Currently I´m working on a project w…
-
Hi I have successfully running PX4 with Navio2 on RPi3.
Now i have issues with auto starting this program as soon as the RPi3 has booted.:
added the binary execution to rc.local
cd /home/pi && ./px…
-
AP_Compass_BMM150 is complied under Raspbian linux and applied on the Raspberry Pi 2. Basically, BMM150 is connected through I2C bus. The device address `CHIP_ID_REG 0x12/0x13` and `CHIP_ID_VAL 0x32` …
-
#### Issue details
Hi guys!
Have built Y6 1.3m on Navio2 and RPi3, ArduCopter 3.4-dev.
In stabilize mode it flies more then awesome in any direction except yaw control. When I push yaw left - drone…
-
Just updated to the latest Emlid Raspbian image from here : https://docs.emlid.com/navio2/Navio-APM/configuring-raspberry-pi/
```
782161 overflow
782199 SPI speed set to 1MHz.
783143 SPI speed set to…