-
El hexápodo tiene una barbaridad de servos (mínimo 18) que necesitarán control. Un Arduino normal en principio no puede manejar tantos, así que esta issue servirá para decidir un método de control alt…
-
Hello, I wanna change the stepper motors to the **servo motors**, how should I modify the code to control them?
Thanks!
-
The repo contains an [example](https://github.com/linuxcnc-ethercat/linuxcnc-ethercat/blob/master/examples/omrg5/omrg5.xml) for Omron G5 Servos:
```xml
```
But this …
-
hello,
i am using grbl version 0.9 to make a cnc plotter with 2 steppers and 1 servo. the servo is connected to pin d11 of arduino uno. the servo is not working at all only a buzz like sound comes so…
i123k updated
12 months ago
-
If I set my td receiver on 100mw and telemetry on 25mw is my understanding correct that vfr and rssi are also on 25mw?
To answer my own question yes it is the telemetry signal not the rx signal.Als…
-
Hi, n00b here.
How is the sevo out controlled?
I see it in my rostopic list, however I am not able to make it move.
What value to /commands/servo/position corresponds to what steering angle?
…
-
Hi,
the servo motor is powered by 6.5V voltage with PCA9685 board, but the max V+ voltage for PCA9685 board is 6V. Will this be a problem?
-
code
```python
from machine import I2C, Pin
from pca9685 import PCA9685
from servo import Servos
import time
# Initialize I2C bus
i2c = I2C(0, sda=Pin(0), scl=Pin(1), freq=400000)
# Initia…
-
## Problem
- Device: ESP32-S3-Wroom-1
When we try to command more than two servos, only the two servo motors function as expected. The rest does not move at all. All servos individually run if on…
-
Hey cpopp, I'm trying to built this arm, using an esp8266, and mg995 servos, But having an issue with servos not responding, only ticking. This is the first time I've tried to use the mg995 on the chi…