-
Why is the motion control not work on my android phone when I play switch sports.
I use ryujinx emulator. Any solution ?
Everything is work but only the motion control not work. I have followed ev…
-
I am trying to a vio with the imu reading in the ros2 interface with PX4 with the topic sensorcombined. Which is the timestamp of the imu data. I am working in simulation. Thank you. I have tried usin…
-
The calibtation results is not good enough. I think there may be some issues with IMU, but I don't know where the problem is.
```
Calibration results
===================
Normalized Residuals
--…
-
```
What steps will reproduce the problem?
1. Run the wizard
2. Fail at step 5 of 16 (or complete)
3. Try to do the calibration again by going back or forward
4. The 'Start' and 'Continue' buttons wil…
-
```
What steps will reproduce the problem?
1. Run the wizard
2. Fail at step 5 of 16 (or complete)
3. Try to do the calibration again by going back or forward
4. The 'Start' and 'Continue' buttons wil…
-
```
What steps will reproduce the problem?
1. Run the wizard
2. Fail at step 5 of 16 (or complete)
3. Try to do the calibration again by going back or forward
4. The 'Start' and 'Continue' buttons wil…
-
```
What steps will reproduce the problem?
1. Run the wizard
2. Fail at step 5 of 16 (or complete)
3. Try to do the calibration again by going back or forward
4. The 'Start' and 'Continue' buttons wil…
-
```
What steps will reproduce the problem?
1. Run the wizard
2. Fail at step 5 of 16 (or complete)
3. Try to do the calibration again by going back or forward
4. The 'Start' and 'Continue' buttons wil…
-
Could you please implement phase stepping also for Prusa Mini?
-
We use mpu6000 to obtain the accelerometer and gyroscope values at 100Hz while collecting the frequency at 20Hz. And used the method in the documentation to calibrate the camera and imu and between th…