-
Code the subroutines in C or C++, for all directions. See pseudo code for guidelines.
-
I get an error with the latest version of the lib and notice the examples are still in "PDE" format not "INO"
Thought there was a version 1.64 ?
> Arduino: 1.8.19 (Windows 10), Board: "Arduino Uno…
-
While I set Xaxis.move,Yaxis.move both negtive, both of two motor not run.
I am using ESP32 with arduino & TMC2209 driver.
I have tested that 3 type work and only 1 type not work.
Code:
``…
-
Hi Rick,
Need your help in converting the code to use Arduino CNC Shield V3.
Pin assignment's for two Steppers and one servo are below -- **Appreciate your Help**
I want to switch to your firmware…
-
The [`AccelStepper`](https://www.airspayce.com/mikem/arduino/AccelStepper/index.html) Arduino library is able to group stepper motors together and move them in sync. We should explore this feature.
…
-
- [x] Test firmware compilation, many boards/architectures
- [x] Test example compilation, many boards/architectures
Try LED and accelstepper:
- [ ] run on uno,mega
- [x] run on m0/m4
Finis…
-
Implement AccelStepper to driver head motion (nod and rotate).
Initially do a slow cyclic (e.g.: sine wave?) panning back and forth. Randomly nod the head?
Also, add commands to have UDP command str…
-
Hello.
I'm making an OAT.
The firmware is up to date on the MKS Gen L V2.1 board.
I'm going to use the motor as the Close loop motor I had.
It works with the same input as A4988.
So I tested it, …
-
-
Hi - I stumbled across this library while trying to find a solution to move the Accelstepper run() method out of the main polling loop. I believe your adaptation of the Accelstepper library is the exa…