-
Hello,
I have hooked up a quadrature encoder to my BLDC motor in an attempt to get better startup torque and low speed control than with the default FOC sensorless mode. Unfortunately, I can't get…
-
I'm testing the torque control algorythm with arduino UNO, simple FOC shield (version 2.0.4) and BLDC motor (8 poles) with Hall sensors integrated.
When I launch the program obtain "Failed to notice …
-
### Variant
ADC
### Control type
FOC
### Control mode
Torque
### What can we do to make the firmware better?
hello every one and than u for good FW, u made it.
i'm trying to run electric power…
-
I'm attempting to use grbl to control a mill I've been converting to CNC. So far the stepper motor control has been painless, but I'm also trying to replace the bulky motor with a smaller, more powerf…
-
Hello...
My name is Chris from Indonesia.
I would like to ask is it possible to use RS 485 port in openCR 1.0 board to control another device beside dynamixel. I have BLDC motor controller need to b…
-
Collect and discuss BLDC motor and motor controller designs, to be used for the horizontal rotation of the 360 LIDAR
-
I am using a dual rotary encoder that has two pins A and B that determine the direction of rotation. While doing that I am running two BLDC motors as well. I have found that if I disable PWM or write …
afnan updated
3 years ago
-
I would like to control 2 hoverboard motors for a custom wheelchair project using web interface . I already have simple web interface for ESP32 microcontroller which is simple joystick which output 2…
-
Hello
What do you think it is possible to add PID position conttol of the mcm_xyz user from cnczone to this SDK. It auto generates code and project for IAR or Keil. From what i looked it is implement…
-
Hi there,
I used the example code SetCurrent as following with an Arduino UNO and its working as intended.
```
#include
/** Initiate VescUart class */
VescUart UART;
float current = 2.0…