-
Hi.
First of all, thanks a lot for creating such a great project like diyBMS.
I am assembling my own energy storage and I have reached the stage where I want to connect diyBMS with Cerbo GX from…
-
Hey there!
I just stumbled upon this repo today as I am also trying to map the ford canbus. I had a 2015 Mustang GT and a 2016 GT350 that I had data logged and reversed to be able to use the instrume…
-
Was using your guide on the tach 3-pin hotend fan from Orion and noticed that Klipper wasn't reporting the RPM when attached to my Huvud CANBUS pcb when attached to 5V endstops. https://ellis3dp.com/…
-
In ros1 we used to use the [socketcan bridge](https://github.com/ros-industrial/ros_canopen/tree/melodic-devel/socketcan_bridge) to convert the canbusses to `can_msgs/Frame` ros messages. All messages…
-
Hi All,
I am looking for some insight or guidance on an issue I am running into with the can2040 libraries.
I have noticed that when I attempt to transmit a message, if the `ACK` is not detecte…
-
Firstly great work Gabonator I hope you haven't given up on this project quite yet.
There seems to be a problem with calculating the baud rate on CAN signals, it seems to change depending on the spac…
-
Is it necessary to set jumper on J49 in order to use CanBus?
These are the two pins between the CanBus connector and Four-Wire FAN0 connector.
In the manual i can't find any info about the terminal …
-
Ciao,
Per caso sei riuscito anche a trovare gli ID canbus per l'aria condizionata?
-
I have a John Deere 6068 with a VP44, could you help me modify canbus messages going from and to it with a MITM attack? I need to fool the ECM into thinking the pump has no codes. Also, my canbus is o…
-
fix pin assignment CANbus (wrong tx-pin)