-
### 🐛 Bug
I am encountering an issue when trying to train my donkeycar simulator agent using the train.py script from rl-baselines3-zoo. While I can successfully import and call the environment using…
-
Hi,
I used PiBakery V2 with a custom raspbian image from Donkey Car [https://docs.donkeycar.com/guide/install_software/#get-the-raspberry-pi-working](url) and even without any configuration blocks …
-
https://github.com/jwatte/donkey_racing/blob/master/teensy_hat_firmware/teensy_hat_firmware.ino
Your documents and some of the code comments list being able to send commands from the Pi to the Teen…
-
Remote access the board and see camera output as well as control the car from a laptop
-
Hi,
I'm trying to run the code in 'calibrate_camera'
When I do so, I am getting the following error on my 'stock' donkey car install:
```
(dk) pi@d2:~/donkey_racing/calibrate_camera $ pytho…
filmo updated
6 years ago
-
Below is a test matrix
>> When @DocGarbanzo is ready then we can fill in the links to the proposed documentation changes in the sections below. We will do the install based on those instructions.
…
-
http://marksolters.com/programming/2016/06/22/arm-toolchain-16-04.html
-
Hardware: RPi 4B 4GB
OS: Bullseye
DC: v5.0.dev3
MPU: mpu9250 on Robo HAT MM1 at hex address 0x69
IMU configuration in myconfig.py:
```
# IMU for imu model
HAVE_IMU = True
IMU_SENSOR = 'mpu92…
TCIII updated
1 month ago
-
We suggest a 120 degree to 160 degree camera lens for Donkeycar so the car, which is close to the ground, can still see both sides of the track. Such a lens creates a distorted image. This is genera…
-
Hello again,
the current API between DonkeyCar and MM1 is too weak to support all fantasitic MM1 features.
Why not using a similar API like GYM part and remote DCsimulator ?
Instead of exchanging…