-
I am trying to set the board to have dual Y axis, but am struggling in understanding how.
Which config lines should I modifiy?
-
The following code produces a dual axis plot with properly labelled tick marks on both axis with seaborn 0.12.2 (python 3.10.11). However, with seaborn 0.13.2 (python 3.11.4) the tick labels of the ri…
-
Good morning,
I cannot figure out how to wire dual Z to the S42B drivers on my SKR 1.4 turbo. It appears that i could use the adapter as well as the CLS pins on the board, but am not sure if this w…
-
In Task 2.1, the PDF mentions to compare aforementioned different approaches, seemingly refering to Euler angles, rotation matrices, quaternions, and dual quaternions in the Task header. In the README…
-
The settings page lists only inversion values for XYZ axes, however when using dual X or Y axis, inverting both motors requires inverting a currently undocumented (As far as I can find) N axis.
$3 …
-
I just implemented the dual axis setup and a contraption created to have the X' (A) limit switch easy to adjust to square the machine. This part seems to be just fine.
BUT (yes, there has to be one…
-
Add input processors, similar to those in [Unity](https://docs.unity3d.com/Packages/com.unity.inputsystem@1.0/manual/Processors.html), and replace the existing ones
And allows users to define the p…
-
### Distribution
Linux Mint 22 Cinnamon
### Package version
6.2.9
### Graphics hardware in use
Intel Corporation HD Graphics 530
### Frequency
Always
### Bug description
I’m experiencing an i…
-
Trying to get dual axis working. I'm using the RPi CNC hat from Protoneer which the developer says has the same pinout as the Arduino CNC board.
I have the board set to map the 4th driver to A3/A4 …
-
I spent many hours to get Eddy Coil working on two different 3D printers with IDEX configuration, to no avail. It doesnt let me calibrate the eddy with the PROBE_EDDY_CURRENT_CALIBRATE CHIP=btt_eddy c…