-
It is very unclear that you MUST use the CAN connector to power the board and cannot use the HVIN + USB connectors alone.
For future readers, here's how the various connectors work for real-world u…
-
After using Doug's 01__hb-testAlLegs.js script it appears as if the Hip servo motors for Legs 2, 3 and 6 on Andrew's robot are not working properly.
-
I just got a Sainsmart 3018-PROver CNC running grbl version 1.1f. The machine seems to work but I hear a regular clicking noise from all three steppers. It's a fairly loud pulsing at around 18Hz which…
hires updated
4 years ago
-
I'm following the guide from here:
> http://learn.trossenrobotics.com/10-interbotix/crawlers/phantomx-hexapod/68-phoenix-code.html
When using this code with the CommanderEX firmware on the Arbot…
-
I am looking for some advice on representing engine ignition state in VSS consistently across the different Vehicle.Powertrain.Type {COMBUSTION, HYBRID, ELECTRIC}.
eg: Vehicle.PowerTrain.Combustion…
-
- Once we've decided on how we want to move, we need to translate these commands into motor controls
- On the computer side we will receive a [twist message](http://docs.ros.org/api/geometry_msgs/htm…
-
The 13th principle of the Zen of Python: **There should be one -- and preferably only one -- obvious way to do it**.
Reminder: documentation for python3-ev3dev v2 can be found at https://python-ev…
-
Create the mapping between the electrical and programming systems.
- CAN IDs
- Digital IO ports (limit switches, external encoders, etc)
- etc
-
The positioning system shifts strangely,
Pinpoint problem, encoders, gyro, or software.
How to :
- Get data samples (3 cases: Turn robot power on off, reset gyro board only, software reset of gyro bo…
-
Hi there, awesome work!
This is a feature request or more even a feature possibility request.
I'm looking for a way to align VTOL Quadplane Motors in flight when they are stopped. (like this: http…