-
### Describe Your Problem:
Can not connect to roomba
### Expected behavior:
_No response_
### Logs:
```shell
[6/9/2023, 12:30:18 PM] [iRobot] Logging into iRobot...
[6/9/2023, 12:30:20 PM] [iRob…
-
hi,
i followed you guide step by step by step.
and i am really bad with linux..
but i got it working at least the connection.
my device shows up in domoticz but when i hit start the vacuum bin s…
-
As noted in https://github.com/dwyl/home/issues/122#issuecomment-674579661 I think the iRobot Roomba 960 vacuum cleaner was good investment that has _already_ paid off. 🙌
Also noted in https://githu…
-
I am trying to use your roomblock github to interface with my iRobot Create 2 and RPLidar A1. I am using a Raspberry Pi 4 that is running ubuntu 16.04. When I run "roslaunch roomblock_bringup roombloc…
-
Helllo, I want to add a LIDAR sensor to faceplate part create 3, after that i will use nav2 stack to navigate an unknown environment. Could you give any advice to do that. Additionaly, i cant use aws …
-
New to python here,
When executing the command
./password.py
to retrieve the password from the cloud, i have noticed because my password ends in an ampersand - & - this character that the sc…
-
### Describe the bug
After upgrade, some IOT devices will not connect to wifi if any security is turned on. If network is left open, all devices connect successfully
### OpenWrt version
r23228-cd1…
-
### Describe Your Problem:
I am not sure if this is a supportability issue (e.g. i3 is not supported), but i'll describe the issue.
When docked, the homebridge-iRobot plugin is throwing a timeout …
-
https://community.home-assistant.io/t/irobot-roomba-init/687957
-
### Describe Your Problem:
I installed to iRobot plugin, entered my credentials and the robot is added. the log file shows the message below ever few seconds.
[iRobot] Roomba Dust Vader connection…