-
Hi,
I need T-RGB to work as slave with Raspberry PI (PI as a master)
But I need one single output pin on T-RGB as an interrupt for communication slave->master (to trigger RPI to read slave)
I d…
-
I'd like this for `miso`, would be cool to have the following wrapped-up in one command:
- Login / Register views
- User / Session tables (custom provider)
- Password hashing w/ `scrypt`
- OAuth…
dmjio updated
6 years ago
-
Hello,
I recently did a run of MISO but I don't really get an output. It makes all the .miso files but the content shows no PSI values. I get an index error when I try to summarize which i assume i…
-
The [sample app README](https://github.com/dmjio/miso/blob/afeec837d96464c5b5a40db43cf5dd34815cc957/sample-app-jsaddle/README.md) mentions "hot reload". Perhaps these terms aren't all that standardise…
-
at begin - thank you for great project.
Normally I use Arduino IDE, and here with platformio I can not find definintions of pin used to communicate with display...
I searched code for all "MISO" …
-
### Port, board and/or hardware
ESP32 ESP32-S3-WROOM-1-N4R8
### MicroPython version
LVGL MicroPython 1.23.0 on 2024-10-06; Generic ESP32S3 module with Octal-SPIRAM with ESP32S3
https://www…
-
I am working on a specific epd which requires to read data from the MOSI line after sending a command but switching the CS pin between each byte. It's unclear to me if this is even achievable with the…
-
SPI.Bus initialization has some weird things for me...
The code below
- sometimes works fine,
- sometimes causes reset
- sometimes gives me this error:
```
MPY: soft reboot
PIN_MOSI =
PIN…
-
## WHAT
**Write** execution workflow for [MISO](http://hollywood.mit.edu/burgelab/miso/). Use the provided [small files for testing](https://github.com/iRNA-COSI/APAeval/tree/main/tests/test_data…
-
When building example with ``-DPICO_PLATFORM=rp2350-arm-s`` it stucks on first 8-bit writes.