-
Hi,
We have some issue with STM32 board and VNH2SP30 motor driver:
Logic levels for STM32 are 3.0V (3.3V but the board has IC with a diode which generates 3.0 power supply for STM32 ). According t…
-
Not an issue with the worksheet itself, but soldering some transistors and flying wires onto stripboard might speed the workshop up a bit.
-
Design the housing of the new driver for BLDC/DC motors
-
[CANopen](https://github.com/CANopenNode/CANopenPIC)
[USB2CAN](https://github.com/codenocold/microbus)
[AC Servo Driver for STM32F4](https://github.com/rene-dev/stmbl)
[Odrive CAN](https://github.c…
-
Related Issue: https://github.com/ogawa-ros/ogameasure/issues/64
-
- [x] H bridge hardware/software driver validation
> - [x] Determine max frequency
- [ ] Motor characterization
> - [x] Create test hardware
> - [ ] Determine K value for duty cycle on -1 to 1, step s…
-
I am a bit stuck here. Finally tried to get homemod working.
If I use the basic_cia402 driver, I am unable to set
```
```
6 amps into a 2 amp motor may not be wise.
If I use …
-
Copied from discord and translated using deepl:
@stiebel :
> Just did a search for engines: https://eckstein-shop.de/V-TEC12VMini25DDCMotorGleichstromGetriebeMotorStirnradgetriebe770RPM
> Seems…
-
Stepper motor driver ULN2003 in simulation.
-
I recently created the [3MS](https://github.com/3DCoded/3MS), a modular multimaterial system for Klipper. Currently it has custom macros developed by me, but I want to control it via HappyHare for mor…